Chestnut Electric delivers fast, code-compliant electrical repair for homes and businesses across Greenwich, Stamford, Norwalk, Darien, New Canaan, Westport, and nearby CT towns. From persistent breaker trips and flickering lights to damaged wiring and failed GFCI/AFCI devices, our licensed electricians fix the root cause—with upfront, line-item pricing and tidy workmanship.

Need help now? Call 203-834-1130 or request service online. We prioritize urgent safety issues (burning smells, hot panels, partial power).

---

What We Repair (Residential & Commercial)

• Troubleshooting & Diagnostics – tripping breakers, dead outlets, buzzing/humming, partial outages, nuisance GFCI trips

• Wiring & Devices – outlets/switches, aluminum or knob-and-tube remediation, pigtails, splices, junction boxes

• Panel & Breakers – standard, AFCI, GFCI, dual-function breakers; main breaker issues; labeling; correcting double-taps

• Lighting – recessed, chandeliers, exterior/security, low-glare retrofits, dimmers/smart controls

• Grounding & Bonding – service bonding, GES upgrades, surge protection (Type 1/2 SPD)

• Appliances & Dedicated Circuits – HVAC, EV chargers, ranges/ovens, laundry, sump/transfer pumps

• Code Corrections – failed inspection punch-lists, resale/code-compliance repairs, permit close-outs

DIY warning: National outlets strongly advise against DIY electrical repairs—common hazards include overloaded circuits and loose connections that can spark fires. Hire a licensed pro for diagnosis and repair. The Washington Post

---

Why Chestnut Electric

• Licensed & insured local team; respectful, on-time, shoe covers & clean-up

• Root-cause diagnostics (load tests, fault tracing, thermal checks) to fix problems the right way

• Clear options & pricing before work begins—no surprises

• Permits & inspections handled with your local building department when required (e.g., Greenwich, Stamford) Greenwich

• Utility coordination for service/panel work with Eversource or UI as needed (cut/reconnect, metering requirements) Eversourceuinet

• Warranty & follow-up—we stand behind our repairs

---

Symptoms & What They Usually Mean

• Frequent breaker trips → overloaded circuit, short/ground fault, or failing breaker

• Flickering/dimming lights → loose neutral, shared neutrals, starting loads, or failing connections

• Warm faceplate/burning odor → loose termination or failing device—shut off power and call us

• Buzzing at panel → overloaded breaker/loose lug—needs immediate evaluation

• GFCI keeps tripping → moisture/ground fault on the load side or device failure

---

Our Repair Process

1. Evaluate & Diagnose – tests, measurements, and safety inspection

2. Present Options – repair vs. replace; standard vs. AFCI/GFCI; surge protection add-ons

3. Upfront Pricing – line-item proposal; you choose the option

4. Professional Repair – correct devices, torque specs, labeling, documentation

5. Verification & Walk-Through – function tests and homeowner tips

6. Permit/Inspection – we pull permits and schedule inspections where required (town-specific) Greenwich

---

Typical Planning Ranges*

• Single standard breaker replacement: $100–$260

• Main breaker replacement: $200–$600

• Circuit diagnostics (first hr on site): $150–$250

• Small device/wiring repair (per location): $150–$350
  *Final pricing depends on access, panel type/condition, AFCI/GFCI requirement, and permitting. You’ll receive a firm, written quote before work begins.

---

When Utilities or Permits Are Involved

Some repairs (service or meter work, panel changes) require utility coordination and/or a permit + inspection. We manage the paperwork and scheduling:

• Eversource: submit a service request for new/changed/upgraded service; homeowners cannot authorize reconnects on their own. Eversource+1

• United Illuminating (UI): follow the Install/Upgrade Service process and metering requirements. uinet+1

• Greenwich permits: published electrical fee schedule (minimums apply). Greenwich

---

Safety & Prevention Tips

• Don’t ignore repeated trips—it’s a safety device doing its job

• Avoid daisy-chaining power strips or running heavy appliances on extension cords

• Test GFCI monthly; use AFCI/GFCI where code requires for added protection

• Schedule a panel tune-up every few years (torque checks, labeling, thermal scan)

---

FAQs

Do I need a permit for electrical repairs?
Many towns require a permit/inspection for panel work, new circuits, or substantial wiring fixes. We handle the paperwork and inspection scheduling. Greenwich

How fast can you come out?
We offer prompt appointments and prioritize urgent safety issues. Call for today’s availability.

Can I reset a tripping breaker repeatedly?
A single reset is okay; repeated trips mean there’s a fault or overload. Call us to diagnose—don’t force a breaker to stay on. The Washington Post

Will my repair need the utility involved?
If the work affects your service (meter/socket, service conductors, service size), utilities like Eversource or UI must be coordinated. We take care of it. Eversource

Do you work on older wiring (aluminum or knob-and-tube)?
Yes. We provide remediation, safe splicing, and circuit upgrades to meet today’s standards—plus documentation for real-estate or insurance needs.

---

Call or Request Service

Get a licensed electrician to your door—fast. Call 203-834-1130 or request a no-pressure estimate online.